Sunday, 10 August 2025

Fender Extender

 The fender extended will hopefully keep a bit more crud of the front of the engine. The existing mud guard does a reasonable job and the engine bash plate helps too. The bike already came with spacers to raise the front mud guard so mud does not clog between the tyre and guard. The extender was a cheap upgrade and a easy fix. 


 First I removed the four bolts holding the mud guard. The underside of the guard got a good washing. Any dirt would not help the extender sticking. I offered up the extender the mud guard and marked the edge. The kit comes with a cloth embedded with a cleaner. The cloth was rubbed all over the marked area on the underside the mud guard and opposite face on the extended.

 


 Next job was to arrange a stick the double side sticky pads to the extender. I also removed the makers sticker. I carefully peeled off the protective backing the sticky pads. Then ever so carefully positioned the extender under the mud guard and aligned the two parts. There was no second chances. The two elements were joined. they lined up nicely. 


 The kit contained four of these fiddly body poppers. An eight millimetre hole was drill at four points around the edge of the extender. The holes were cleaned up and popper inserted. The button was pressed down to secure the popper. Easy to do just fiddly and you have to be careful not to damage the finish on the existing mud guard.

 


 The top edge of the extender just need trimming back to make a smooth line into the existing mud guard. The mud guard was put back in place the risers and the fours bolts done up. Another small and cheap upgrade from Hitchcocks